The facility expansion allows for full-rate production of missiles in Lots 4 and beyond. The U.S. Air Force expects to procure 4,900 JASSMs over the life of the program.

Maj. Gen. Robert W. Chedister, Commander, Air Armament Center, Headquarters Air Force Materiel Command, Eglin Air Force Base, FL, was the keynote speaker at the JASSM expansion ceremony.

"JASSM is an incredible leap in our ability to swiftly defeat even the toughest enemy in his own back yard," said Maj. Gen. Robert W. Chedister. "We are eternally grateful to the men and women who have worked so hard, and for so long, to make our job of defending this nation that much easier. We needed JASSM, and you delivered!"

"Our Troy facility is truly a world class production facility and we have made it even better," said Randy Bigum, Strike Weapons vice president at Lockheed Martin. "The facility enhancements enable us to increase production rates and to produce JASSM-Extended Range (ER) and other follow-on JASSM preplanned product improvements (P3I) in the same facility without impacting regular JASSM production."

Lockheed Martin's award-winning manufacturing facility in Troy has been producing the JASSM missile in a production environment since late 1999 for Engineering Manufacturing and Development (EMD) testing, and completed the Lot 1 Low-Rate Initial Production (LRIP) of 76 missiles. During the LRIP Lot 2 missile build, Lockheed Martin expanded the Troy JASSM facility to increase production capability to 40 missiles per month.

The Troy facility completed delivery of 42 Lot 1 missiles for the B-52 Required Assets Available (RAA) in September 2003, ahead of schedule. Additionally, the program delivered 53 missiles to the B-2 community for the RAA.

"We have met or exceeded all program commitments and have been extremely successful in getting to production rates during EMD," said Mike Inderhees, JASSM program director at Lockheed Martin. "The Troy facility's ability to get to full rate has been a direct result of their Lean Initiatives, which streamlined production processes and product flow."

The JASSM facility expansion was approved in January 2003 with construction initiated in June 2003. The 43,176-square-foot expansion doubles the current building size and quadruples its capacity. The facility expansion is now completed and will support production at the maximum rate by mid-2005. Lean Six-Sigma manufacturing principles were applied to make the new expansion area and the existing area highly efficient, with state-of-the-art automated process controls. New transport equipment and tools were integrated into the conveyorized system, improving the missile operator's ergonomic and environmental work areas by eliminating many of the manual steps previously required.

Lockheed Martin has had a successful business relationship with the state of Alabama for the past 10 years. As a result of strong state and local partnership over the years, Lockheed Martin Pike County Operations has amassed a string of national, state and industry awards for production, quality, security and environment and safety excellence. The Troy facility has been honored with Industry Week's "America's Best Plants" award, the Defense Investigative Service Cogswell Award, the 2002 Shingo Prize for Excellence in Manufacturing and the 2002 Alabama Manufacturer of the Year award.

"The JASSM and its associated technologies elevate Pike County Operations to the next level in missile production," said Jody Glazner, Pike County Operations plant manager. "Likewise, the new all-up round facility expansion takes JASSM production operations to the next level in terms of material movement and process automation. At full production, JASSM will employ well more than 100 people, approximately double the existing workforce. The expansion completion is a significant milestone for Pike County Operations as well as Alabama. The State of Alabama has been extremely supportive and a great partner in facilitating efforts to bring several production lines online and to make expansion and rate capability increases a reality."

The Pike County Operations facility is a manufacturing and final assembly plant for Lockheed Martin Missiles and Fire Control. Pike County Operations is now recognized throughout the Lockheed Martin Corporation as the Strike Weapons Center of Excellence. The facility supports several production programs: Javelin, Longbow, Hellfire and Predator in the tactical missiles mission area; and the JASSM and AGM-142 missile programs in the strike weapons mission area.

Through the expansion of existing programs and the addition of the Terminal High Altitude Area Defense (THAAD) missile production program, Joint Common Missile program and the Loitering Attack Missile program, Pike County Operations plans to build more facilities and gradually add a significant number of employees over the next few years.

JASSM enables aircrews to strike high value, heavily defended targets from outside the range of enemy air defenses. JASSM is a 2,000-pound class weapon with a multi-purpose penetrator warhead. It is planned for deployment on B-1, B-2, B-52, F-16, and F/A-18E/F aircraft. It cruises autonomously in adverse weather, day or night, defeating the target with pinpoint accuracy.

Headquartered in Bethesda, MD, Lockheed Martin employs about 130,000 people worldwide and is principally engaged in the research, design, development, manufacture and integration of advanced technology systems, products and services.

THAAD is designed to defend U.S. troops, allied forces, population centers and critical infrastructure against short- to medium-range ballistic missiles. THAAD comprises a command and control/battle management system, missiles, launchers and radar. The THAAD missile uses hit-to-kill technology to destroy targets, and is the only weapon system that engages threat ballistic missiles at both endo- and exo-atmospheric altitudes. A key element of the nation's  Ballistic Missile Defense System, THAAD is a Missile Defense Agency program, with the program office located in Huntsville, AL.

Alabama Sen. Jeff Sessions and Rep. Terry Everett were on hand for a ceremony marking the start of missile production. Sen. Sessions said, "It is important to appreciate the need for the THAAD system. We need a capability to defend our troops, and this missile will be a critical part of that effort."

Rep. Everett said, "Two years ago, I was here to break ground on this facility. The THAAD system is of enormous importance to this nation. The lives of Americans are depending on the work done here in Pike County, Alabama."

"After four years of rigorous design, development and testing, the THAAD team is eager to begin flight testing the missiles that will be produced in this plant," said Tom McGrath, THAAD vice president and program manager for Lockheed Martin. "We are pleased to be manufacturing the THAAD missile in this state-of-the-art facility in Troy, just two years after ground-breaking."

Flight-testing of THAAD begins in late 2004 and continues through early 2009, with low-rate production to support an initial operating capability expected to begin in 2007. In the current Development Program phase, THAAD missile production will employ about 25 people at the Troy facility. As the program progresses and the production rate grows, employment could rise to as many as 150 people.

In August 2002, Lockheed Martin began construction of the 46,000-square- foot, $12 million facility specifically for THAAD missile integration, assembly and test operations. The company used its lean production and Six Sigma techniques to assure the facility design was optimized for the THAAD missile effort. The first THAAD missile manufactured in Troy will be a "pathfinder"  missile, used to demonstrate and validate test processes and procedures.  Immediately following the pathfinder missile, the first of 16 developmental flight test missiles will be manufactured.

The THAAD program selected Lockheed Martin's Pike County Operations for missile production due to its outstanding performance in building quality products, as well as its attention to cost-control and manufacturing detail on several other Department of Defense programs currently being produced at the location.

The Pike County Operations encompass 3,863 acres, 336,000 square feet of building space and employs more than 280 personnel. Employees at the plant perform final assembly, test and storage of missiles, including the Hellfire II and Longbow Hellfire tactical missiles, the Javelin and the Predator antitank missiles. Pike County Operations also will build the new Joint Common Missile (JCM), slated to ultimately replace the Hellfire II, Longbow and Maverick  missiles, and will also produce the Non Line-of-Sight - Launch System (NLOS-LS) Loitering Attack Missile (LAM). In addition, the facility builds the Joint Air-to-Surface Standoff Missile (JASSM) and is Lockheed Martin's Center of Excellence for Strike Weapons.

"The THAAD program's degree of sophistication will take Pike County  Operations to the next level in world-class missile assembly," said Jody Glazner, the general manager of the Troy facility. "Our employees are highly trained, highly motivated and fully capable of building a missile our forces can count on in those defining moments on the battlefield."

Lockheed Martin has had a successful business relationship with the state of Alabama for the past 10 years. As a result of strong state and local partnership over the years, Lockheed Martin's Pike County Operations has amassed a string of national, state and industry awards for excellence in production, quality, security, environmental protection and workplace safety. The Troy facility has  been honored with Industry Week's "America's Best Plants" award, the Defense Investigative Service Cogswell Award and the 2002 Alabama "Manufacturer of the Year" award.

Additionally, the facility received the prestigious Shingo Prize for Excellence in Manufacturing Award in 2002, which "recognizes organizations that use world-class manufacturing strategies and practices to achieve world- class results." Pike County Operations is among a small number of facilities recognized with this award.

Lockheed Martin is a world leader in systems integration and the development of air and missile defense systems and technologies, including the first operational hit-to-kill missile defense system. It also has considerable experience in missile design and production, infrared seekers, command and control/battle management, and communications, precision pointing and tracking optics, as well as radar and signal processing. The company makes significant contributions to all major U.S. missile defense systems and participates in several global missile defense partnerships.

Headquartered in Bethesda, MD, Lockheed Martin employs about 130,000 people worldwide and is principally engaged in the research, design, development, manufacture and integration of advanced technology systems, products and services.

For additional information, visit our website: http://www.lockheedmartin.com